Check the Soft roller cleaner head
Step 1 - Removing the cleaner head from the wand
- Disconnect the cleaner head from the wand by pressing the release button.
Step 2 - Unlocking the brushbar end cap
NB: Beware of sharp objects when checking for blockages.
- If you cannot clear an obstruction you may need to remove the brushbar.
- Turn the cleaner head upside down so the underside of the cleaner head is facing you.
- Use a coin to unlock the fastener marked with a padlock.
Step 3 - Removing the brushbar
NB: This product has carbon fibre brushes. Take care if coming into contact with them, as they may cause minor skin irritation. Wash your hands after handling the brushes.
- Rotate the end cap to the open position.
- Gently slide the large brushbar away from the cleaner head.
- Remove the end cap from the brushbar.
Step 4 - Clear any debris
- Carefully clear any debris from the brushbar.
Step 5 - Refitting the brushbar
- Slide the large brushbar back onto the cleaner head, around the motor.
- The end cap should be in the open position as shown.
- Once in place, rotate the end cap back into the closed position.
Step 6 - Locking the brushbar end cap
- Close the fastener by turning a quarter turn clockwise. Ensure that the fastener is fully turned and the base plate and the brushbar is secure.
- Re-fit the cleaner head and test the machine.
