Removing blockages from the inlet pipe and cone shroud

Step 1 - Removing the clear bin from the cyclone

To release the clear bin from the cyclone:

1. Push the red button by the clear bin to open the bin base.
2. Press a second time to release the clear bin from the main body of the appliance.
3. Remove the clear bin carefully.

Step 2 - Inspecting the inlet and the cyclone shroud

• Be careful not to pull the ‘ON’ trigger.
• Check the cone shroud and inlet for blockages.

Step 3 - Cleaning the cyclone shroud

• Clean the cyclone shroud with the brush on the combination tool to remove lint and dust.
• Do not immerse the whole cyclone unit in water or pour water into the cyclones.

Step 4 - Refit the clear bin

• Ensure the clear bin is completely dry before replacing.
• To replace the clear bin, push the clear bin up and in to the main body of the appliance. It will click into place.

Step 5 - Close the bin base

• Close the clear bin base so it clicks into place and is secure.

• No

•  

  Has this resolved the problem?

  
  Yes
• Back