Dyson Small Ball Support - How to operate the brush control | dyson.co.nz
Dyson Small Ball Multi Floor
Dyson Small Ball Animal upright vacuum cleaner

Contact us

Our customer care team is available during the following hours:

  • Mon-Fri 8:30am - 5:00pm EST
  • 0800 397 667
  • Dyson New Zealand, 6 / 99 Carbine Road, Mount Wellington, Auckland, New Zealand,1060
 

How to operate the brush control

  • Ensure the handle is fully extended and locked into place
  • Plug the machine in.
  • Recline the machine into the vacuuming position.
  • Ensure the stabilizing wheels are fully retracted.
  • Press the ON/OFF switch.

diagram showing how to start vacuuming

Vacuuming on different floor types.

  • The brushbar will start automatically once the machine is switched on and lowered into the vacuuming position.
  • The brushbar will not rotate when the machine is in the upright position.
  • The cleaner head adjusts automatically to all floor types, and the brush bar contains carbon fibre filaments for removing fine dust from hard floors.
  • Press the brush control button located next to the ON/OFF switch to turn the brushbar off for vacuuming delicate rugs and floors.
  • Press the button again to restart the brushbar.
  • Some carpet manufacturers do not recommend using a vacuum cleaner with a rotating brushbar. Please refer to the carpet manufacturer but if you are unsure, we recommend vacuuming with the brushbar switched off.

diagram showing use on different floor types