Dyson V11 Cordless vacuum support - Clean the bin | Dyson.co.nz
Dyson V11 Absolute Pro

Contact us

Our customer care team is available during the following hours:

  • Mon-Fri 8:30am - 5:00pm EST
  • 0800 397 667
  • help@dyson.co.nz
  • Dyson New Zealand, 6 / 99 Carbine Road, Mount Wellington, Auckland, New Zealand,1060

Clean the bin

To minimize dust/allergen contact when emptying, encase the clear bin tightly in a dust proof bag and empty. Remove the clear bin carefully from the bag. Seal the bag tightly, dispose as normal.

Remove the bin

Hold the machine with the bin in a downwards position. Firmly push the red bin release button. The bin will slide down opening the bin base.

Press the red button located on the bin runner to release the bin and slide the bin off the runner.

Gently tap the side of the cyclone over a bin. This will remove any fine dust clogged up in the cyclone. Using the Combination tool, clean the shroud to remove any debris around the cyclone.

Check the opening on the cyclone shroud for any blockages. Remove as necessary

The clear bin is not dishwasher safe and the use of detergents, polishes or air fresheners to clean the clear bin is not recommended as this may damage your machine. Clean the clear bin with a damp cloth only.

To refit the clear bin;

Insert the spine on to the bin runner.

Close the clear bin by pushing the bin base upwards until the clear bin and bin base click into place.