Dyson V11 Cordless vacuum Support - Quick-release Mini motorised head | Dyson.co.nz
Dyson V11 Absolute Pro

Contact us

Our customer care team is available during the following hours:

  • Mon-Fri 8:30am - 5:00pm EST
  • 0800 397 667
  • Dyson New Zealand, 6 / 99 Carbine Road, Mount Wellington, Auckland, New Zealand,1060
 

Quick-release Mini motorised head

Clear the floor tool

With the Quick-release Mini motorised head removed from the machine, turn it over and undo the fastener. Locate the end cap and using a coin, turn it anticlockwise a quarter of the way. This will allow you to remove it.

Note: There should be a small padlock icon along with directional arrows to help you unlock the end cap.

Remove the Brush bar from the Quick-release Mini motorised head and clear away any hair or fibres. Check the neck of the Cleaner head (where the Cleaner head connects to the Wand) for any blockages. Ensure there is no build-up of dust or debris in the small crevice between where the Brush bar sits and the neck of the Cleaner head.

With the Brush bar clear from any debris, refit it back into the Cleaner head and securely fasten the end cap.