Soft roller cleaner head
Clear the floor tool
With the Cleaner head removed from the machine, turn it over. On the underside of the Cleaner head by the Soft roller, locate the fastener. Using a coin, turn the fastener anticlockwise a quarter of the way to remove the end cap.
Note: There should be a small padlock icon along with directional arrows to help you unlock the end cap.
Remove the Brush bar from the Soft roller cleaner head and clear away any hair or fibres. Check the neck of the Cleaner head (where the Cleaner head connects to the Wand) for any blockages. Ensure there is no build-up of dust or debris in the small crevice between where the Brush bar sits and the neck of the Cleaner head.
With the Brush bar clear from any debris, refit it back into the Cleaner head and securely fasten the end cap.