Dyson Pure Hot + Cool Link Support - How to use the remote control | Dyson.co.nz
Dyson Pure Hot+Cool™ White/Silver

Contact us

Our customer care team is available during the following hours:

  • Mon-Fri 8:30am - 5:00pm EST
  • 0800 397 667
  • help@dyson.co.nz
  • Dyson New Zealand, 6 / 99 Carbine Road, Mount Wellington, Auckland, New Zealand,1060
 

How to use the remote control

Using Remote Control

To operate, point the remote control toward the front of the base.

On/Off

Press the Power ON/OFF button on the appliance or remote control to stop the purifier. The appliance will continue to monitor the air quality.

Airflow speed

Press the Airflow speed button to increase and decrease the airflow speed.

Oscillation On/Off

Press the Oscillation button to scroll through the options from 0° to 350°. Customise your oscillation settings in the Dyson Link app and it will appear as an option as you scroll through.

Information menu

Scroll through the options to monitor the performance of your appliance. The menu will also allow you to access information about the pollutants in the air and the temperature and humidity levels. When a particular type of pollutant causes air quality to decrease, the symbol for that pollutant will show in the display.

Auto mode

Set your appliance to Auto mode and the on-board sensors will intelligently adjust the settings of the
appliance according to the air quality.

Air quality: your appliance will pause when the target air quality has been reached, switching on again when the air quality levels drop.

Airflow speed: The airflow speed will increase until the target air quality and temperature have been reached.

Night mode: Your appliance will only run with Airflow speeds from 1 to 4.

Airflow direction

Press the Airflow direction button to change the direction of airflow from front to back.

Your appliance will continue to purify in both settings.

Heating mode will only function when the air direction is set to the front. If airflow is changed to the back, your appliance will change to cooling mode.

Night mode

Night mode will dim the display and the appliance will run more quietly, making it ideal for use while sleeping. If Auto mode has been set, Night mode will reduce airflow speeds to range from 1 to 4. You can manually change the airflow from 1-10. Customise your Night mode settings in the Dyson Link app.

Sleep timer

Your appliance will turn off automatically after the selected amount of time.

To set the time: Press the button to scroll through the time options.

Once activated press the Sleep timer button once to see the time selected.

To cancel the Sleep timer: Press the Sleep timer button twice.

Cooling mode

Press the blue cooling mode button to enter cooling mode. The power button light will change from red to blue to indicate that you have entered cooling mode. To adjust the airflow speed use the airflow control button or use the auto purification mode for automatic control.

Heating control

Use the heating control to set the desired room temperature. The appliance will then automatically manage the temperature until the target has been reached.

  • Is there anything else we can help you with?
    Yes
  • No
  • Back