Dyson Pure Hot + Cool Link™ Support - Cleaning your Dyson purifier | dyson.co.nz
Dyson Pure Hot + Cool Link™ purifier heater fan

 

Cleaning your Dyson purifier

Ensure unplugged

Ensure the purifier is unplugged.

Allow to cool

  1. This purifier is hot when in use and for a short period after use.
  2. If the purifier has been in use, leave for 1 to 2 hours in order to allow the purifier to cool down completely.
  3. Do not let bare skin touch hot surfaces.
  4. If children are present, consider positioning the purifier out of their reach.

How to clean

  1. Wipe dust from the loop, filter unit and other parts with a dry or damp cloth when dust accumulates.
  2. Do not use detergents or polishes.

Sensor hatch

  1. Clean the hatch every time the filter is replaced.
  2. Open the small hatch on the side of the purifier.
  3. Use a cotton bud to clean inside and remove any debris.
  4. This maintains sensor accuracy and ensures the continuing high performance of the purifier.