Washing the filter step by step

• Remove the filter unit by twisting anticlockwise to the open position. Gently pull away from the appliance.

• Wash the inside of the filter unit first; hold it upright under the cold water tap and agitate using a rotating motion.

• Wash the outside of the filter unit; fill the unit with cold water, place your hand over the open end and shake gently.
• Repeat washing the inside and outside of the filter unit until the water runs clear.
• Gently tap the filter unit to remove any excess water and leave to dry with the open end facing up.

Drying the filter

• Leave the filter unit to dry completely for a minimum of 24 hours.
• WARNING: Do not put the filter in a dishwasher, washing machine, tumble dryer, oven, microwave, or near a naked flame.

Replacing the filter

• Check that the filter unit is completely dry.
• To refit, return the filter unit to the open position and twist clockwise until it clicks into place.

• Pull the trigger and run the machine for 2 minutes and then check the filter light.

• Has washing the filter resolved the issue?

  
  Yes
• No
• Back