Quick start guide

• Attach the hose to the hose inlet on the front of the machine.
• Clip the hose to the rear of the wand handle.
• Clip the wand handle to the extension tube.
• Press the release catch on the extension tube to extend, ensuring it 'clicks' into place.
• Attach the floor tool to the extension tube.
• Insert the tools into the holster and attach to the extension tube as shown below.

• Press the release catch on the extension tube to extend, ensuring it 'clicks' into place.

• Accessory tools can be fitted to the hose, wand handle or extension tube as required.

• To reduce the suction pull the release trigger as shown below.

Step 1 - Remove the clear bin and cyclone

• Empty as soon as the dirt reaches the level of the MAX mark – do not overfill.
• Press red button to release cyclone and bin from the machine.

Step 2 - Opening the bin

• Push down on the red button to push the bin assembly down and clear the shroud.

NB: The bin base will not open at this point.

Step 3 - Emptying the bin

• The bin base will only open when the bin assembly is fully pushed down.
• Emptying carefully into a bag is recommended for allergy sufferers.

Do not wash the cyclone assembly or shroud.

Step 4 - Refitting the clear bin

• Push the bin assembly up until it clicks into place.
• Do not close the bin base at this point.

Step 5 - Close the bin

• Close the bin base after the bin assembly has been clicked into place.

Step 6 - Reassemble the machine

• Place the bin and cyclone back into place on the machine.

• Return to main menu
• Back